Please use this identifier to cite or link to this item: https://idr.l3.nitk.ac.in/jspui/handle/123456789/10539
Full metadata record
DC FieldValueLanguage
dc.contributor.authorAnne, G.
dc.contributor.authorRamesh, M.R.
dc.contributor.authorShivananda, Nayaka, H.
dc.contributor.authorArya, S.B.
dc.contributor.authorSahu, S.
dc.date.accessioned2020-03-31T08:22:45Z-
dc.date.available2020-03-31T08:22:45Z-
dc.date.issued2017
dc.identifier.citationJournal of Alloys and Compounds, 2017, Vol.724, , pp.146-154en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/10539-
dc.description.abstractAccumulative roll bonding (ARB) process have been used develop Mg-2%Zn/Ce/Al hybrid composite and microstructure, mechanical and corrosion properties were investigated. The electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM) revealed that the grains are significantly reduced and reaches up to 1 ?m in Mg-2%Zn layer and 1.8 ?m in Al layer having high angle misorientation of grain boundaries after subjected to 5-passes of the ARB process. The Al17Mg12, AlMg4Zn11 and Al11Ce3 intermetallic phases were observed through the XRD analysis. Mechanical properties of the hybrid composite improved with increase in the number of ARB passes which is attributed to work hardening, grain refinement and uniform distribution of Ce particles. Presence of Ce in the hybrid composite restricts the phenomenon of dynamic recrystallization and prevents the grain growth during ARB process. The corrosion rate of Mg-Zn/Ce/Al hybrid composite (0.72 mm/y) improved about 3.3 times as compared to that of Mg-2%Zn alloy (2.37 mm/y). 2017 Elsevier B.V.en_US
dc.titleDevelopment and characteristics of accumulative roll bonded Mg-Zn/Ce/Al hybrid compositeen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.