Please use this identifier to cite or link to this item: https://idr.l3.nitk.ac.in/jspui/handle/123456789/10913
Full metadata record
DC FieldValueLanguage
dc.contributor.authorRamesh, S.
dc.contributor.authorAnne, G.
dc.contributor.authorNayaka, H.S.
dc.contributor.authorSahu, S.
dc.contributor.authorArya, S.
dc.date.accessioned2020-03-31T08:23:20Z-
dc.date.available2020-03-31T08:23:20Z-
dc.date.issued2019
dc.identifier.citationMaterials Research Express, 2019, Vol.6, 5, pp.-en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/10913-
dc.description.abstractCombined multiaxial forging (MAF) and rolling was performed on Cu-3% Ti (wt%) alloy at room temperature with emphasis on microstructural evolution, improvement in mechanical properties, and corrosion resistance. Microstructural changes were confirmed from various characterization techniques, and co-related with mechanical properties. TEM analysis revealed high shear band density in the 3 pass MAF + 90% rolled sample appearing due to high strain. EBSD analysis revealed transformation to low angle grain boundaries from high angle grain boundaries. Maximum microhardness and UTS reached to 340 HV and 960 MPa, respectively in the processed samples. Significant grain refinement was observed in MAF processed Cu-3%Ti alloy, and after combined MAF + rolling, higher dislocation density and refinement of shear bands were observed. In addition, potentio-dynamic polarization test was used to study the corrosion behavior of the alloy. Scanning electron microscope (SEM) was used to analyze the corroded surface morphology. 2019 IOP Publishing Ltd.en_US
dc.titleEffects of combined multiaxial forging and rolling process on microstructure, mechanical properties and corrosion behavior of a Cu-Ti alloysen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.