Please use this identifier to cite or link to this item: https://idr.l3.nitk.ac.in/jspui/handle/123456789/12174
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPoddar, M.K.
dc.contributor.authorRyu, H.-Y.
dc.contributor.authorYerriboina, N.P.
dc.contributor.authorJeong, Y.-A.
dc.contributor.authorLee, J.-H.
dc.contributor.authorKim, T.-G.
dc.contributor.authorKim, J.-H.
dc.contributor.authorPark, J.-D.
dc.contributor.authorLee, M.-G.
dc.contributor.authorPark, C.-Y.
dc.contributor.authorHan, S.-J.
dc.contributor.authorChoi, J.-G.
dc.contributor.authorPark, J.-G.
dc.date.accessioned2020-03-31T08:38:45Z-
dc.date.available2020-03-31T08:38:45Z-
dc.date.issued2020
dc.identifier.citationJournal of Materials Science, 2020, Vol.55, 8, pp.3450-3461en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/12174-
dc.description.abstractChemical mechanical polishing (CMP) is one of the important steps that involves during fabrication of semiconductor devices. This research highlights the importance of tungsten (W) polishing slurries consisting of a novel nonionic, heat-activated FeSi nanocatalyst on the performance of W chemical mechanical polishing. The results obtained from the polishing data showed a higher W removal rate of 5910 /min with a slurry consisting of FeSi nanocatalyst at a polishing temperature of 80 C. The increase in W polishing rate using FeSi slurry was explained on the basis of formation of a thicker oxide layer (WO3) due to the interaction between the W surface and hydroxyl radicals ( OH) generated via the reaction between FeSi and hydrogen peroxide at 80 C. Higher OH generation and increase in oxygen depth profile of W film were confirmed by UV Vis spectrometer and AES analysis, respectively. Compared to Fe(NO3)3 catalyst, the slurry with FeSi showed a higher static etch rate at 80 C. Potentiodynamic polarization results obtained using FeSi slurry showed thicker WO3 passivation layer as compared to the slurry with Fe(NO3)3. The increase in the polishing rate of W CMP using slurry with FeSi nanocatalyst can be essentially attributed to the generation of much stronger oxidant OH due to its increased catalytic effect at a high polishing temperature of 80 C. 2019, Springer Science+Business Media, LLC, part of Springer Nature.en_US
dc.titleNanocatalyst-induced hydroxyl radical ( OH) slurry for tungsten CMP for next-generation semiconductor processingen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.