Please use this identifier to cite or link to this item: https://idr.l3.nitk.ac.in/jspui/handle/123456789/13593
Full metadata record
DC FieldValueLanguage
dc.contributor.authorManjaiah, M.
dc.contributor.authorNarendranath, S.
dc.contributor.authorBasavarajappa, S.
dc.contributor.authorGaitonde, V.N.
dc.date.accessioned2020-03-31T08:48:13Z-
dc.date.available2020-03-31T08:48:13Z-
dc.date.issued2014
dc.identifier.citationTransactions of Nonferrous Metals Society of China (English Edition), 2014, Vol.24, 10, pp.3201-3209en_US
dc.identifier.uri10.1016/S1003-6326(14)63461-0
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/13593-
dc.description.abstractTiNi shape memory alloys (SMAs) have been normally used as the competent elements in large part of the industries due to outstanding properties, such as super elasticity and shape memory effects. However, traditional machining of SMAs is quite complex due to these properties. Hence, the wire electric discharge machining (WEDM) characteristics of TiNi SMA was studied. The experiments were planned as per L27 orthogonal array to minimize the experiments, each experiment was performed under different conditions of pulse duration, pulse off time, servo voltage, flushing pressure and wire speed. A multi-response optimization method using Taguchi design with utility concept has been proposed for simultaneous optimization. The analysis of means (ANOM) and analysis of variance (ANOVA) on signal to noise (S/N) ratio were performed for determining the optimal parameter levels. Taguchi analysis reveals that a combination of 1 ?s pulse duration, 3.8 ?s pulse off time, 40 V servo voltage, 1.8�105 Pa flushing pressure and 8 m/min wire speed is beneficial for simultaneously maximizing the material removal rate (MRR) and minimizing the surface roughness. The optimization results of WEDM of TiNi SMA also indicate that pulse duration significantly affects the material removal rate and surface roughness. The discharged craters, micro cracks and recast layer were observed on the machined surface at large pulse duration.en_US
dc.titleWire electric discharge machining characteristics of titanium nickel shape memory alloyen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.