Please use this identifier to cite or link to this item: https://idr.l3.nitk.ac.in/jspui/handle/123456789/13789
Full metadata record
DC FieldValueLanguage
dc.contributor.authorMustafa R.
dc.contributor.authorShivaprasad K.N.
dc.contributor.authorDas B.B.
dc.date.accessioned2020-03-31T14:15:22Z-
dc.date.available2020-03-31T14:15:22Z-
dc.date.issued2019
dc.identifier.citationLecture Notes in Civil Engineering, 2019, Vol.25, pp.707-715en_US
dc.identifier.uri10.1007/978-981-13-3317-0_63
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/13789-
dc.description.abstractIn the present study, setting time and variation in strength of fly ash based geopolymer mortar prepared from natural sand as fine aggregates. Blast furnace slag (GGBS), micro silica and lime dust used as additives to fly ash based geopolymer mortar at 5, 10 and 15% of weight of fly ash. Alkaline activator used in the present study is combination of sodium silicate solution and sodium hydroxide solution. Concentration of sodium hydroxide solution was maintained 10 M and sodium silicate to sodium hydroxide ratio was fixed as 2.5:1 by weight. From the test results, it is observed that setting time and compressive strength geopolymer samples were significantly influenced by the type of additive added in the preparation of the geopolymer mortar. © Springer Nature Singapore Pte Ltd. 2019.en_US
dc.titleEffect of various additives on the properties of fly ash based geopolymer mortaren_US
dc.typeBook Chapteren_US
Appears in Collections:3. Book Chapters

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.