Please use this identifier to cite or link to this item: https://idr.l3.nitk.ac.in/jspui/handle/123456789/15292
Full metadata record
DC FieldValueLanguage
dc.contributor.authorKhond
dc.contributor.authorAnuj; Arya
dc.contributor.authorShashi B.; Majumdar
dc.contributor.authorBhaskar; Bhatt
dc.contributor.authorJatin; Srivastav
dc.contributor.authorAjeet K.
dc.date.accessioned2021-05-05T10:26:51Z-
dc.date.available2021-05-05T10:26:51Z-
dc.identifier.citationTRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , Vol. , , p. -en_US
dc.identifier.urihttps://doi.org/10.1007/s12666-021-02201-0
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/15292-
dc.description.abstractIn the present paper, the corrosion behavior of Hf-rich Hf64Cu18Ni18 (at%) metallic glass (MG) was studied in acidic and alkaline media using electrochemical polarization experiments. Three different molar solutions of NaOH and HCl were used for the experiments. The results show that the glassy alloy possesses significantly high corrosion resistance in alkaline solution than acidic one. Pits are observed on the sample in acidic media, whereas alkaline sample does not show pitting. In both the solutions, primarily, HfO2 is formed on the surface as a corrosion product. The corroded surface is non-uniformly distributed on the ribbon and found to decrease with concentration of NaOH. The non-uniform distribution is attributed to inhomogeneity in the ribbon sample. In case of HCl solution, corroded surface increases with the increase in HCl concentration. Furthermore, an attempt has been made to understand the corrosion mechanism of this MG in view of phases formed during the experiment.en_US
dc.titleCorrosion Studies of Hf64Cu18Ni18 Metallic Glass in Acidic and Alkaline Mediaen_US
dc.typeArticleen_US
Appears in Collections:1. Journal Articles

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.