Please use this identifier to cite or link to this item: https://idr.l3.nitk.ac.in/jspui/handle/123456789/7955
Full metadata record
DC FieldValueLanguage
dc.contributor.authorShetty, S.
dc.contributor.authorHegde, A.C.
dc.date.accessioned2020-03-30T10:03:11Z-
dc.date.available2020-03-30T10:03:11Z-
dc.date.issued2015
dc.identifier.citationMaterials Science Forum, 2015, Vol.830-831, , pp.655-658en_US
dc.identifier.urihttp://idr.nitk.ac.in/jspui/handle/123456789/7955-
dc.description.abstractA new alkaline bath has been proposed for deposition of bright Sn-Ni alloy coatings on mild steel (MS). Depositions were carried out at different current densities (c.d.) and their corrosion behaviors were studied in 5% NaCl solution by electrochemical AC and DC methods. Sn-Ni coating, deposited at low c.d. i.e. at 1.0 A/dm2 was found to be the most corrosion resistant compared to those at other higher c.d., even up to 4.0 A/dm2. This least corrosion rate (CR) is attributed to high wt. % Sn in the deposit. Increase of CR at high c.d. range is due to decrease of wt. % Sn, explained by the observed anomalous type of codeposition, followed by the bath. Regardless of the deposition c.d., the bath developed bright coatings, inherent of Sn-Ni alloy. Experimental results are discussed taking in account of the phase structure, composition and surface morphology of the coatings, evidenced by X-ray diffraction (XRD), Energy Dispersive X-ray (EDX) and Scanning Electron Microscopy (SEM) analysis. � (2015) Trans Tech Publications, Switzerland.en_US
dc.titleElectrodeposition of Sn-Ni alloy coatings and their characterizationen_US
dc.typeBook chapteren_US
Appears in Collections:2. Conference Papers

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.