Please use this identifier to cite or link to this item: https://idr.l3.nitk.ac.in/jspui/handle/123456789/7887
Title: Effect of substrate temperature on the structural and electrical properties of spray deposited lead sulfide thin films
Authors: Veena, E.
Bangera, K.V.
Shivakumar, G.K.
Issue Date: 2016
Citation: Materials Today: Proceedings, 2016, Vol.3, 6, pp.2225-2231
Abstract: Lead sulfide (PbS) thin films were prepared by chemical spray pyrolysis method using lead acetate and thiourea as precursors of Pb+2 and S-2 ions. X-ray diffraction (XRD) technique, scanning electron microscope (SEM) and EDAX analysis were used for structural, morphological and compositional characterization. XRD analysis shows that the films are cubic in nature with a preferred orientation along (2 0 0). EDAX analysis shows that films deposited at 150�C are sulfur rich. An increase in the substrate temperature results in a decrease in the sulfur content of the prepared film. It has been observed that thin films deposited at or above 225�C are smooth & uniform morphologically. Beyond a substrate temperature of 275�C, the films become discontinuous and non-uniform. However, the films are sulfur rich, even at 275�C. Electrical conductivity of prepared thin films have been measured using silver contacts in coplanar geometry. Films are n - type as confirmed by hot probe technique. The electrical conductivity at room temperature (25�C) was in the order of 10-4 ?-1cm-1 and was found to increase with increase in temperature showing the semiconducting nature of the films with the band gap of 0.39 eV. � 2016 Elsevier Ltd.
URI: http://idr.nitk.ac.in/jspui/handle/123456789/7887
Appears in Collections:2. Conference Papers

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.