Please use this identifier to cite or link to this item: https://idr.l3.nitk.ac.in/jspui/handle/123456789/8303
Title: Influence of modified cutting inserts in machining of Ti-6Al-4V alloy using PCD insert
Authors: Rao, C.M.
Rao, S.S.
Herbert, M.A.
Issue Date: 2018
Citation: Materials Today: Proceedings, 2018, Vol.5, 9, pp.18426-18432
Abstract: In modern manufacturing industries, the emerging needs of modern metal cutting operation are to increase the tool life with good surface finish and higher material removal rate. These objectives can be achieved by reducing the cutting temperature at the cutting zones with proper cooling system. The present work involves the experimental study of MQL application through the micro-holes drilled on the cutting inserts during turning of Ti-6Al-4V alloy using PCD inserts. The effect of the micropool lubrication of cutting insert on cutting temperature, surface roughness and tool wear have been compared with normal insert machining. It has been observed that in micropool lubrication method, cutting temperature was reduced by 30-33% over normal insert machining. Micropool lubrication reduced the flank wear to a maximum of about 20-30% over normal insert machining. The experimental result of the current research work indicates considerable benefits of surface roughness and tool wear through reduction in cutting temperature due to the perforation of the cutting insert. � 2018 Elsevier Ltd. All rights reserved.
URI: http://idr.nitk.ac.in/jspui/handle/123456789/8303
Appears in Collections:2. Conference Papers

Files in This Item:
There are no files associated with this item.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.